Support

Get support for your Nintendo systems, software and services

General Fixes for Broken or Damaged Toy-Con Accessories

Description:

A cardboard piece or other item from a Nintendo Labo kit is damaged.

Additional Information:

You can view which parts are used for the Toy-Con accessories from each kit:

Which part of the Toy-Con is damaged?


toy-con_cardboard_sheet.jpg

Possible Solutions:

  • If a piece of cardboard on a Toy-Con is bent, you can reinforce the affected piece using some of the leftover cardboard sheets.
  • If the cardboard on a Toy-Con is torn, you can mend the torn part using adhesive tape.

If you need additional assistance, please contact our Customer Support.

toy-con_reflective_stickers.png

Possible Solutions:

  • If a reflective sticker is no longer adhering to a cardboard piece on the Toy-Con, it is recommended that you use double-sided tape or glue to adhere the sticker to the cardboard again.
    Do not use clear, adhesive tape over the reflective stickers, as this will likely affect the way the light reflects back to the IR Motion Camera.
  • If the reflective stickers are damaged and cannot be used, you can replace them with pieces of commercially available reflective tape.
    Do not replace reflective stickers with materials such as clear plastic tape or tinfoil, as this will likely affect the way the light reflects back to the IR Motion Camera.
  • Otherwise, click here for replacement information.

If you need additional assistance, please contact our Customer Support.

toy-con_grommets.png

Possible Solutions:

  • If an eyelet was placed incorrectly, you can remove it using a coin or other small flat object.
    Gently insert the coin between the cardboard and the flat side of the eyelet to loosen it. Keep in mind that if an eyelet was placed backwards, it will not affect the Toy-Con accessory's performance. toy-con_grommet_removal.png

If you need additional assistance, please contact our Customer Support.

toy-con_string.png   toy-con_rubber_bands.png

Possible Solutions:

  • If the string for the Toy-Con Fishing Rod or the Toy-Con Robot is damaged, you can replace it with string of similar length.
  • If a rubber band is damaged, you can replace it with one of a similar size.

If you need additional assistance, please contact our Customer Support.

toy-con_small_sponges.png

Information:

  • Sponge stickers are not required to complete a Toy-Con.
  • If a sponge sticker is damaged or no longer available, this will not affect the accessory's performance.

If you need additional assistance, please contact our Customer Support.

toy-con_straps.png

Information:

  • The straps are used for the Toy-Con Robot only.

If you need additional assistance, please contact our Customer Support.

Related categories