Using the Sensor Bar Stand

Applies to: Wii


sensor2_en.gif

Communication between the Wii Remote and the Sensor Bar may be improved in some situations by mounting the Sensor Bar on the Sensor Bar stand. (For example: if the TV is sitting on the floor.)

  1. Remove the protective film from the foam pads on the bottom of the Sensor Bar stand.
  2. For additional stability, you can add adhesive-backed foam tape from the supplied sheet. These can be applied to both the top and bottom of the stand.
  3. If you are using the extra foam tape, remove the protective film from the piece on the top of the Sensor Bar stand.
  4. Mount the Sensor Bar stand to:
    • the front edge of the surface the TV is sitting on, or
    • to the top of the TV.

Important Note: If you have not already done so, be sure to set the Sensor Bar option in the Wii console's System Setting to "Below TV." This will help ensure an optimal experience. Click here for more information.

sensor2_en.gif

Communication between the Wii Remote and the Sensor Bar may be improved in some situations by mounting the Sensor Bar on the Sensor Bar stand. (For example: if the TV is sitting on the floor.)

  1. Remove the protective film from the foam pads on the bottom of the Sensor Bar stand.
  2. For additional stability, you can add adhesive-backed foam tape from the supplied sheet. These can be applied to both the top and bottom of the stand.
  3. If you are using the extra foam tape, remove the protective film from the piece on the top of the Sensor Bar stand.
  4. Mount the Sensor Bar stand to:
    • the front edge of the surface the TV is sitting on, or
    • to the top of the TV.

Important Note: If you have not already done so, be sure to set the Sensor Bar option in the Wii console's System Setting to "Below TV." This will help ensure an optimal experience. Click here for more information.